Care and Usage Instructions – Please read patiently!
Whether you have a TPE doll or a silicone doll, always handle it gently. Never treat it roughly!
1. Face Makeup
The face makeup on both TPE and silicone dolls is very durable, but please do not frequently lick, rub, scrub, or pick at the facial makeup!
Use only clean water** to clean the face makeup area. The same applies to body makeup on silicone dolls.
2. Cleaning Body Stains & Maintenance
TPE dolls: Use a cotton swab or wet wipe dipped in vegetable oil (any colorless cooking oil) to gently wipe away stains.
Silicone dolls: Wipe stains with water.
After cleaning, let the doll dry completely, then apply baby powder. If the material feels sticky to the touch, just apply baby powder as well.
Both materials do **not** require frequent full-body washing. Under normal conditions, simply keeping the doll dressed is sufficient.
3. Cleaning the Vaginal Area
For detachable (split-type) lower body:
A removable insert (onahole/sleeve) is already installed inside the doll. When removing or reinstalling the insert, apply a lubricant to your hands first.
For integrated (one-piece) lower body:
Wrap a wet wipe or a damp towel around a chopstick, gently insert it into the canal, and rotate it to clean.
⚠️ Never use a high-pressure water jet to clean deep inside the canal while blocking the opening!
4. Standing
TPE dolls: Standing is only possible with standing foot pins installed. When standing, always lean the doll against an object. Do not let the sole material touch the ground and bear the doll's full weight.
Silicone dolls: Standing is pinless. They can stand for extended periods only on a soft surface, with both feet evenly bearing the weight.
5. Long-Term Storage
When not in use for an extended period, lay the doll flat or have it sit on a soft surface. Do not leave any joint excessively bent. Dress the doll or wrap it in a blanket for storage. Keep it away from direct sunlight and humid environments.
6. Protective Clothing
It is recommended to always dress the doll in the bodysuit provided by Aotume as a base layer for protection. Keep all parts of the doll away from sharp or pointed objects.
7. Fingers (Double Copper Wire Type)
Do not frequently bend the fingers back and forth in large movements, as this may cause metal fatigue. Regardless of the finger type, always bend them gently and avoid having them pressed by other objects.
8. Staining Prevention & Treatment
Both TPE and silicone can stain.
When buying dark-colored clothing:
1. Dissolve some cooking salt in water.
2. Soak the dark clothing in the salt water for 2–3 days (change the salt water periodically).
3. If the water no changes color, the clothing is safe to wear. Otherwise, do not use it.
Note: Plush animal-fiber clothing and wig strands do not stain, regardless of color. If the wig cap is dark-colored, please wear a light-colored wig cap underneath as a barrier.
If staining unfortunately occurs:**
TPE dolls: Use a stain remover cream (de-colorant paste).
Silicone dolls: The stain will fade on its own over time (how long it takes depends on the severity of the stain).
